C CHEMOURS Trademark

Dry and wet lubricating greases and oils; Lubricating oils used as additives in the plastics and automotive industries; Dust absorbing and binding compositions; Brines and stable liquids for high temperature lubrication, namely, lubricating oil and grease; Leather-renovating chemicals oil and grease; Fluorocarbon telomers, their solutions and dispersions for use as lubricants; Fuels and Halon replacement gas for fire systems; Dielectric gases and insulating gases for industrial use; Hydrocarbon fuel used as a cleaning agent and wafer etching compound for semiconductor wafers; Heat carrier preparations, namely, heating oils for industrial use

Plastics in the form of sheets, membranes, filaments, strips, blocks, hoses, pipes, tubes and rods, for use in manufacture of thermic or acoustic insulation; Flexible tubes of plastic, not metal, rubber or textile; Synthetic resinous polymers containing fluorine in the form of shaped pieces, namely, sheets, strips, tubes, tapes and filaments for use in manufacturing; Synthetic Rubber; Plastics in the form of powders, granules, liquids, and dispersions for industrial use for use in further manufacture; Artificial rubbers

Industrial chemicals, namely, refrigerants for mobile, stationary, heat pumps and industrial air conditioning systems; Gas propellants for aerosol containers; Solvents, namely, Mono- and Dimethylamine for industrial and commercial use; Power transmission fluids; Brines and stable liquids for high and low temperature heat transfer for industrial use; Chemical products, namely, aluminum silicate for use in foundry sand; Zircon aluminum silicate used as a molding sand for the fabrication of castings in foundries and refractories; Titanium dioxide for industrial purposes; Chemical preparations for use in the manufacture of paint, paint pigment, enamel and varnishes, except pigments; Foundry sand; Sodium chlorite for use in the mechanical generation of chlorine dioxide; Sodium cyanide for industrial use; High purity glycolic acid used in the manufacture of cosmetic and cleaning preparations and as a chemical reagent for scientific or research use; Inorganic acids, Ion-exchange resins; Catalysts, namely, mono-, di-, and trimethylamine for use in the manufacture of other catalytic chemicals, dealdolization of diacetone alcohol and condensation of acetone with formaldehyde to produce synthetic resins used in paper bonding and coating; Chemical stone sealers that penetrate the stone to provide sealing protection; Chemicals for use in the extraction of precious metals from ores and for the recovery of non-ferrous metals from non-ferrous dross; Chemical products used in mining operations for metal mining; Organic acids and their salts, namely, glycolic acid, perfluorooctanoic acid, chlorosulfonic acid, sulfuric acid, acetic acid; Organic acids and their solvents, namely, glycolic acid, perfluorooctanoic acid, chlorosulfonic acid, sulfuric acid, acetic acids for degreasing, use in fertilizers, inorganic chemical manufacturing, petroleum refining, pharmaceuticals, soaps and detergents, pigments, dyes, textiles, pulp and paper, metal, steel and car batteries and cleaning; Cellulose esters for industrial purposes, namely, cellulose acetate, nitrocellulose; Esters for industrial purposes, namely, ester vinyl ether, hexfluoropropylenepolyether methyl ester; Chemical Bonding agents and adhesives used for application to glass fibers used in reinforced plastic laminates and for adhesive bonds between other hydrophilic surfaces such as paper and wood; Polymeric coatings and impregnants for use in the manufacture of polishes, paints, production tubing, wellhead equipment, coatings, and downhole tools; Fluorochemical surface active agents for the manufacture of fluoropolymers and improving antistatic and repellent behavior; Fluoroalkyl esters; Chemical compounds, namely, paper fluoridizers and surfactants for reducing the surface tension of aqueous solutions; Fluorinated hydrocarbon gas for the manufacture of refrigerants and high performance elastomer seals; Synthetic resinous non-stick coatings for cookware and kitchen utensils, namely, synthetic resin adhesives for laminating purposes, unprocessed synthetic resins; Fluorochemical surface active agents for use in manufacture of fluoropolymers; Unprocessed synthetic resins; Unprocessed Plastics and unprocessed plastics in the form of powders, granules, liquids, and dispersions for industrial use; Unprocessed perfluoropolymer resin; Formative powder-like plastics, namely, micropellets for molding processes, polybutylene terephthalate PBT resin, acetal resin, and PET polyester resin; unprocessed Polyester resin, unprocessed Polyethylene resin and unprocessed Fluorine resins; Unprocessed fluorine-containing polymers; Synthetic organic dispersions in aqueous form for environmental dust control for unsealed roads and open areas; Chemical intermediates used in the manufacture of cleaning and polishing agents, paints, inks, waxes and polishes; Halocarbon blowing agents for use in the manufacture of plastic foam sheet for food packaging applications, none of the aforesaid goods containing formaldehyde; Chemical and fluorinated compounds and unprocessed fluorinated resin preparations for use in protecting fabric; Chemical compound in the nature of a textile finish with oil, water and stain repellent characteristics for use with textiles; Chrome complexes in the form of chemical compounds for use in the treatment of paper, textiles of natural and synthetic fibers, leather, asbestos, glass fabrics, particularly to impart water repellency, to improve wax adhesion, to act as sizing agents and to impart to leather lubricating and softening properties which are not adversely affected by ordinary dry cleaning solvents; Unprocessed synthetic resinous fluorine-containing polymers in the form of moulding and extruding compositions, sulphur, kaolin, potash, glue, synthetic resin; Mould-releasing preparations; Catalyst chemicals for use in the manufacture of synthetic materials; Polymerization catalysts and initiators for use in the manufacture of synthetic resinous materials but not including any such goods for use in the pharmaceutical industry; Fluorocarbon chemical preparations for use as release agents and as friction reducing agents for machinery, o-rings, seals, valves, automotive interiors, windows, appliances and rubber and plastic molds; Wetting agents; Gas propellants for use in industrial and pharmaceutical aerosol products; fluorosurfactants for industrial use and food contact packaging for use in the field of oil and grease resistant coatings; Coloring matters, namely, titanium dioxide for use in the manufacture of paints, coatings, and pigments, colorants; industrial cleaning and finishing agents used in the manufacture of metal, plastic, glass and textile materials

Nonstick coating for cookware, bakeware, small electrical appliances, and cooking utensils; Penetrating sealer coatings for use on carpet and products made of stone, tile, ceramics, masonry, and grout; Coating preparations for leather treatment, namely, leather stains and color refinishing; Dyes, namely, tinctorial materials for coat and foam paint applications, varnishes and lacquers for household articles; Pigments and colorants, namely, titanium dioxide pigments and fillers for use in coated and uncoated paper, paperboard and for industrial use; Colorant used for detecting leaks in refrigeration and air-conditioning systems; Preservatives against rust and deterioration of wood and metals; Dyestuffs; Mordants, namely, glycolic acid for use with textiles, paints; Unprocessed natural resins; Metal foil and powder form metals for painters; Binding agents and thinners for paints, shoe paints; coatings for drapery hardware, chutes and sloping channels for handling materials, machinery, machine parts, hand tools, including saws and other carpentry tools, shovels and other gardening tools, power tools, electrical and nonelectrical, stove hoods and stove vents for coloring, reflective, and non-stick purposes; Polymeric coatings and impregnants for concrete; Synthetic resinous non-stick coatings for cookware and kitchen utensils, namely, colors, paints; Coatings in the nature of resin finishes for varnishes and wire enamels; Resinous coatings, namely, resin-based coating for use on polyolefin films; Coating for thin metal sheets, namely, high temperature protection, antimicrobial, anti-tarnish, anti-corrosion and anti-graffiti

Cleaning agents for cleaning electronic circuit boards and metal parts